Differences between revisions 85 and 108 (spanning 23 versions)
⇤ ← Revision 85 as of 2013-01-23 05:30:21 →
Size: 4904
Editor: SébastienVillemot
Comment: Update available Dynare versions
← Revision 108 as of 2018-05-16 15:37:23 → ⇥
Size: 2561
Editor: SébastienVillemot
Comment: Drop reference to the now discontinued unofficial Debian packages
Deletions are marked like this. Additions are marked like this.
Line 5: Line 5:
This page describes the installation of these packages.

= Configuring your package manager to receive Dynare packages =

This should be done only before the first installation.

Packages are available from two sources:
 * Official Debian and Ubuntu archives
 * Dynare repository

Depending on your version of Debian or Ubuntu, and the version of Dynare you want, you will want to choose one or the other of these two sources.

== From official Debian and Ubuntu archive ==		 = Available versions =
Line 21: Line 9:
The status of the package can be monitored on the [[http://packages.qa.debian.org/dynare|Debian Package Tracking System]]. The status of the package can be monitored on the [[https://tracker.debian.org/pkg/dynare|Debian Tracker]].
Line 23: Line 11:
Status of the packages as of 2013-01-23: Status of the packages as of 2018-02-03:
Line 26: Line 14:
|| Debian Squeeze 6.0 (stable) || 4.1.2 || 3.2 ||
|| Debian Wheezy 7.0 (testing) || 4.3.0 || 3.6 ||
|| Debian Sid (unstable) || 4.3.0 || 3.6 ||
|| Debian experimental || 4.3.2 || 3.6 ||
|| Ubuntu Lucid Lynx 10.04 (LTS) || 4.0.4 || 3.2 ||
|| Ubuntu Oneiric Ocelot 11.10 || 4.2.1 || 3.2 ||
|| Ubuntu Precise Pangolin 12.04 (LTS) || 4.2.4 || 3.2 ||
|| Ubuntu Quantal Quetzal 12.10 || 4.3.0 || 3.6 ||
|| Ubuntu Raring Ringtail 13.04 || 4.3.0 || 3.6 ||		 || Debian Jessie 8 (oldstable) || 4.4.3 || 3.8 ||
|| Debian Stretch 9 (stable) || 4.4.3 || 4.0 ||
|| Debian Sid (unstable) || 4.5.4 || 4.2 ||
|| Ubuntu Trusty Tahr 14.04 (LTS) || 4.4.1 || 3.8 ||
|| Ubuntu Xenial Xerus 16.04 (LTS) || 4.4.3 || 4.0 ||
Line 36: Line 20:
If you want to use these sources, you don't need to do anything: they are already configured in your package manager. /!\ Under Debian, you need to select the "contrib" section in your package sources if you want MATLAB support.
Line 38: Line 22:
/!\ Under Debian, you may however need to select the "contrib" section in your package sources, in order to get MATLAB support.

== From Dynare repository ==

Status of the packages as of 2013-01-23:

|| '''Distribution''' || '''Version of Dynare''' || '''Version of Octave used by the package''' || '''Supported archs''' || '''APT source line''' ||
|| Debian Squeeze 6.0 (stable) || 4.3.2 || 3.6 (from squeeze-backports) || {{{amd64}}} || {{{deb http://www.dynare.org/debian squeeze main contrib}}} ||
|| Debian Wheezy 7.0 (testing) || 4.3.2 || 3.6 || {{{amd64}}} || {{{deb http://www.dynare.org/debian wheezy main contrib}}} ||
|| Ubuntu Precise Pangolin 12.04 (LTS) || 4.3.2 || 3.2 || {{{amd64 i386}}} || {{{deb http://www.dynare.org/ubuntu precise main contrib}}} ||

=== Importing the cryptographic signing key ===

First, for security reasons, you should download the archive signing key, which is used to authenticate Dynare packages.

There are two ways of doing it:
 * via the graphical Synaptic package manager
   * first download [[http://www.dynare.org/dynare.public.key]], and save it somewhere
   * then launch Synaptic, go to the "Settings" menu, and click on "Repositories"
   * go to "Authentication" tab, and click on "Import Key file"
   * select the {{{dynare.public.key}}} file that you have downloaded, and click OK
 * or manually, by typing the following in a command line (assuming you have installed {{{wget}}}):
{{{
sudo wget -O - http://www.dynare.org/dynare.public.key | sudo apt-key add -
}}}

=== Adding the correct APT line to your package sources ===

Then you need to give one "APT line" to your package manager; this line is given in the previous table, and depends on your distribution.

For adding them, you can either do it:
 * via the graphical Synaptic package manager:
   * go to the "Settings" menu, and click on "Repositories"
   * go to "Third-party software" tab and click on "Add"
   * you will be asked for an APT line: copy/paste the APT line, then click "Add Source"
 * or manually, by editing your {{{/etc/apt/sources.list}}} with a text editor (as root), and adding the apt line		 /!\ These packages are guaranteed to be compatible with the version of Octave installed on your system. However, it may happen that your version of MATLAB is too recent for these packages (since MATLAB is not part of the release cycle of Debian and Ubuntu); if you experience inexplicable crashes/problems with MATLAB, then consider compiling Dynare from source.
Line 88: Line 37:
You need to specify the correct path: You need to specify the correct path, which depends on the version of Dynare.

For Dynare 4.4.2 and older:
Line 92: Line 43:

For Dynare 4.4.3 and later:
{{{
addpath /usr/lib/dynare/matlab
}}}

Precompiled binary packages of Dynare are available for Debian and Ubuntu distributions of GNU/Linux. These packages work with both Octave and MATLAB.

1. Available versions

Dynare is available in Debian and Ubuntu as an official package.

The status of the package can be monitored on the Debian Tracker.

Status of the packages as of 2018-02-03:

Distribution

Version of Dynare

Version of Octave used by the package

Debian Jessie 8 (oldstable)

4.4.3

3.8

Debian Stretch 9 (stable)

4.4.3

4.0

Debian Sid (unstable)

4.5.4

4.2

Ubuntu Trusty Tahr 14.04 (LTS)

4.4.1

3.8

Ubuntu Xenial Xerus 16.04 (LTS)

4.4.3

4.0

/!\ Under Debian, you need to select the "contrib" section in your package sources if you want MATLAB support.

/!\ These packages are guaranteed to be compatible with the version of Octave installed on your system. However, it may happen that your version of MATLAB is too recent for these packages (since MATLAB is not part of the release cycle of Debian and Ubuntu); if you experience inexplicable crashes/problems with MATLAB, then consider compiling Dynare from source.

2. Installing the packages

There are three packages which you may want to install:

  • dynare: base package, containing a fully functional installation of Dynare for Octave under /usr/share/dynare/matlab

  • dynare-matlab: install this package if you are using MATLAB, in order to recompile the MEX files. You will be asked a few questions by your package manager (such as the location where you installed MATLAB)

  • dynare-doc: documentation (HTML and PDF manual, PDF userguide, example MOD files, ...). They are installed under /usr/share/doc/dynare-doc/. The manual and the userguide are also registered:

    • in the DHelp/DWWW system, in the "Science/Mathematics" section
    • in Rarian (the online help system in Gnome and KDE), in the "Education/Mathematics" section

3. Using Dynare

3.1. Under MATLAB

You need to specify the correct path, which depends on the version of Dynare.

For Dynare 4.4.2 and older: 

addpath /usr/share/dynare/matlab

For Dynare 4.4.3 and later: 

addpath /usr/lib/dynare/matlab

Then, launch Dynare with: 

dynare filename.mod

3.2. Under Octave

You don't need to add a path, it's automatically configured.

Then, launch Dynare with: 

dynare filename.mod

DynareWiki: InstallOnDebianOrUbuntu (last edited 2018-05-16 15:37:23 by SébastienVillemot)