Differences between revisions 1 and 12 (spanning 11 versions)
⇤ ← Revision 1 as of 2010-01-06 17:01:05 →
Size: 2363
Editor: HoutanBastani
Comment:
← Revision 12 as of 2011-02-15 17:50:42 → ⇥
Size: 2519
Editor: HoutanBastani
Comment:
Deletions are marked like this. Additions are marked like this.
Line 4: Line 4:
== Installing the Dynare 4.1.0 Package on Mac OS X 10.5 or higher ==
 1. Download and run the appropriate Dynare Package for your system; OS X v10.5 should download the 32-bit package while OS X v10.6 are free to choose between the 32-bit and the 64-bit packages (unless you will be using Dynare with Octave, which only supports 32-bit).
 1. Install Dynare by double-clicking on the package and following the installation instructions.		 This page documents the installation of the Dynare 4.2 Package on Mac OS X 10.5 or higher.
= First steps =
 1. Download the Dynare package for Mac OS X from [[http://www.dynare.org/download/dynare-4.1/mac|Dynare website]]
 1. Install Dynare by double-clicking on the package and following the installation instructions
 1. The default installation folder is {{{/Applications/Dynare/4.2.0}}}, but you can modify it
Line 8: Line 10:
=== Matlab Setup ===
 1. Once installation is complete, open Matlab. Go to {{{File->Set Path...}}} and add the full path to the {{{DYNARE-4.1.0/}}} installation folder. If you have followed the standard installation (i.e., not changed the default installation location), this will be {{{/Applications/DYNARE-4.1.0}}}.
 1. Within the installation folder, navigate to {{{mex/sources}}}. In the standard installation, this will be {{{/Applications/DYNARE-4.1.0/mex/sources}}}.
 1. At the Matlab prompt, run		 = MATLAB Setup =

 1. Install XCode, which can either be installed from the [[http://developer.apple.com/technology/xcode.html|web]] or from the installation discs that came with your Mac. This installs the necessary gcc compilers required by {{{build_dynare.m}}} in step 3.
 1. In Matlab, change directory to the root folder of the Dynare installation directory. In the standard installation, you need to do:
Line 13: Line 15:
>> build_matlab >> cd /Applications/Dynare/4.2.0
Line 15: Line 17:
 1. Once this has finished running, go to {{{File->Set Path...}}} and add the path to the {{{matlab/}}} subfolder under the installation folder. In the standard installation, this will be {{{/Applications/DYNARE-4.1.0/matlab}}}.  1. At the MATLAB prompt, run
 {{{
>> build_dynare
 }}}
 1. Once this has finished running, go to {{{File->Set Path...}}} and add the path to the {{{matlab/}}} subfolder under the installation folder. In the standard installation, this will be {{{/Applications/Dynare/4.2.0/matlab}}}.
 1. If you have any troubles, please contact <<MailTo(houtan DOT bastani AT SPAMFREE ens DOT fr)>>
= Octave Setup =
Line 17: Line 25:
=== Octave Setup ===
 1. Download and install the latest [[http://sourceforge.net/projects/octave/files/Octave%20MacOSX%20Binary|Octave Mac Os X binary]] and add {{{/Applications/Octave.app/Contents/Resources/bin}}} to your search path. Add the following lines to the {{{/Applications/Octave.app/Contents/Resources/bin/mkoctfile-3.2.3}}} file after the {{{set -e}}} statement at the top of the file		  1. Download and install version 3.2.3 of the [[http://sourceforge.net/projects/octave/files/Octave%20MacOSX%20Binary|Octave Mac OS X binary]] and add {{{/Applications/Octave.app/Contents/Resources/bin}}} to your search path.
 1. If you are going to use the {{{use_dll}}} or {{{k_order_perturbation}}} options, add the following lines to the {{{/Applications/Octave.app/Contents/Resources/bin/mkoctfile-3.2.3}}} file after the {{{set -e}}} statement at the top of the file
Line 25: Line 33:
 }}} NB: Regardless of your OS X version, you must use 32-bit Dynare instead of 64-bit Dynare with Octave, as it does not yet provide 64-bit support.  }}}
 1. Before excuting MOD files, you need to execute the following command at Octave prompt:
 {{{
addpath /Applications/Dynare/4.2.0/matlab
 }}}
Line 27: Line 39:
=== Documentation ===
Documentation can be found in the {{{doc/}}} folder under the installation directory (the default is {{{/Applications/DYNARE-4.1.0/doc}}}). The User Guide (located by default in {{{/Applications/DYNARE-4.1.0/doc/userguide/UserGuide.pdf}}}) is a particularly helpful starting place. Errata for the User Guide can be found [[http://www.dynare.org/DynareWiki/UserGuide|here]].		 = Documentation =

Documentation can be found in the {{{doc/}}} folder under the installation directory (the default is {{{/Applications/Dynare/4.2.0/doc}}}). The User Guide (located by default in {{{/Applications/Dynare/4.2.0/doc/userguide/UserGuide.pdf}}}) is a particularly helpful starting place. Errata for the User Guide can be found [[http://www.dynare.org/DynareWiki/UserGuide|here]].

This page documents the installation of the Dynare 4.2 Package on Mac OS X 10.5 or higher.

First steps

  1. Download the Dynare package for Mac OS X from Dynare website

  2. Install Dynare by double-clicking on the package and following the installation instructions

  3. The default installation folder is /Applications/Dynare/4.2.0, but you can modify it

MATLAB Setup

  1. Install XCode, which can either be installed from the web or from the installation discs that came with your Mac. This installs the necessary gcc compilers required by build_dynare.m in step 3.

  2. In Matlab, change directory to the root folder of the Dynare installation directory. In the standard installation, you need to do: 
    >> cd /Applications/Dynare/4.2.0
  3. At the MATLAB prompt, run 
    >> build_dynare

  4. Once this has finished running, go to File->Set Path... and add the path to the matlab/ subfolder under the installation folder. In the standard installation, this will be /Applications/Dynare/4.2.0/matlab.

  5. If you have any troubles, please contact <houtan DOT bastani AT SPAMFREE ens DOT fr>

Octave Setup

  1. Download and install version 3.2.3 of the Octave Mac OS X binary and add /Applications/Octave.app/Contents/Resources/bin to your search path.

  2. If you are going to use the use_dll or k_order_perturbation options, add the following lines to the /Applications/Octave.app/Contents/Resources/bin/mkoctfile-3.2.3 file after the set -e statement at the top of the file 

    CFLAGS="-arch i386 ${CFLAGS}"
FFLAGS="-arch i386 ${FFLAGS}"
CPPFLAGS="-arch i386 ${CPPFLAGS}"
CXXFLAGS="-arch i386 ${CXXFLAGS}"
LDFLAGS="-arch i386 ${LDFLAGS}"
  3. Before excuting MOD files, you need to execute the following command at Octave prompt: 
    addpath /Applications/Dynare/4.2.0/matlab

Documentation

Documentation can be found in the doc/ folder under the installation directory (the default is /Applications/Dynare/4.2.0/doc). The User Guide (located by default in /Applications/Dynare/4.2.0/doc/userguide/UserGuide.pdf) is a particularly helpful starting place. Errata for the User Guide can be found here.

DynareWiki: InstallOnMacOSX (last edited 2018-02-13 15:38:18 by HoutanBastani)