Differences between revisions 5 and 9 (spanning 4 versions)
Revision 5 as of 2008-11-12 15:03:01
Size: 5811
Comment:
Revision 9 as of 2008-11-12 15:15:05
Size: 6250
Comment:
Deletions are marked like this. Additions are marked like this.
Line 64: Line 64:
The class {{{ModelSpec}}} implements the abstract representation of a given specification. There are 8 subclasses {{{ModelSpecA1, ModelSpecA2, ...}}} corresponding to the 8 models. An instance of this class contains all the parameters of the model, and contains the logic for computing the relative errors of all equations, given the values of the variables and the shocks. The class {{{ModelSpec}}} implements the abstract representation of a given specification, and has 8 subclasses {{{ModelSpecA1, ModelSpecA2, ...}}} corresponding to the 8 models. An instance of such a class contains all the parameters of the model and the logic for computing the relative errors of all equations, given the values of the variables and the shocks.
Line 68: Line 68:
Relative errors are computed using [[latex($$y_{t-1}$$)]], [[latex($$y_t$$)]], [[latex($$y_{t+1}$$)]] and [[latex($$e_t$$)]], following section 1.5 of Michel's May 2007 notes. The forward looking part of the Euler equation is separately computed by {{{ModelSpec::forward_part()}}}, so that it can be integrated over, and then fed back to {{{ModelSpec::errors()}}} (whiich computes the [[latex($$5n+1$$)]] errors). Relative errors are computed using [[latex($$y_{t-1}$$)]], [[latex($$y_t$$)]], [[latex($$y_{t+1}$$)]] and [[latex($$e_t$$)]], following section 1.5 of Michel's May 2007 notes. The forward looking part of the Euler equation is separately computed by {{{ModelSpec::forward_part()}}}, so that it can be integrated over, and then fed back to {{{ModelSpec::errors()}}} (which computes the [[latex($$5n+1$$)]] errors).
Line 70: Line 70:
Solution methods are implemented via a subclass of {{{ModelSolution}}} (see {{{kkm/KKMSolution.cc}}} and {{{kkk/KKKSolution.cc}}}). A solution is simply a function which provides [[latex($$y_t$$)]] given [[latex($$y_{t-1}$$)]] and [[latex($$e_t$$)]]. Solution methods are implemented via a subclass of {{{ModelSolution}}} (see {{{kkm/KKMSolution.cc}}} and {{{kkk/KKKSolution.cc}}}). The purpose of these classes is to provide a uniformized wrapper around the participant's solutions. The main method of those classes is the policy function, which provides [[latex($$y_t$$)]] given [[latex($$y_{t-1}$$)]] and [[latex($$e_t$$)]].
Line 85: Line 85:
 1. KKM don't provide a value for [[latex($$\lambda_t$$)]]. The testing program uses the value of [[latex($$\tau_1 u'(c_1)$$)]] (marginal utility of first country) as a replacement.
1. KKM don't provide a value for [[latex($$\lambda_t$$)]]. The testing program uses the value of [[latex($$\tau^1 u'_c(c^1_t, l^1_t)$$)]] (marginal utility of consumption of first country) as a replacement.
Line 87: Line 88:
 1. KKM don't provide a solution for specification A7 with 4 and 6 countries  1. KKM don't provide a solution for specification A7 with 4 and 6 countries, because their solution method doesn't converge with those particular specifications
 1. in some tests, the technological shock falls outside of the truncated interval. The program prints messages like: {{{error: tech shock above zmax in function ChebPoly}}}. This issue yet needs to be solved.

Testing program for problem A

Status of testing program

The program performs the following tests:

  1. accuracy on a sphere in the state space
  2. accuracy on a stochastic simulation
  3. Den Haan Marcet statistics

For the time being, only the following solutions are implemented:

  • Krueger, Kubler and Malin (KKM)
  • Kim, Kim and Kollman (KKK)

Others are coming soon.

Installing and running the program

The testing program is designed to run on the two following platforms: GNU/Linux and Windows/Cygwin.

You need the following software to run the program:

Download the source of the testing program with:

svn checkout http://www.cepremap.cnrs.fr/svn/JedcTestSuiteTestsA

Then go into the JedcTestSuiteTestsA, and configure the package.

Under GNU/Linux, type:

./configure --with-matlab=/usr/local/matlab76

(where you should give the right MATLAB installation directory)

Under Windows/Cygwin, type:

export FC=/usr/local/gfortran/bin/gfortran
export FCLIBS=/usr/local/gfortran/lib/gcc/i686-pc-cygwin/4.4.0/libgfortran.a
./configure --with-matlab=/cygdrive/c/Progra~1/MATLAB

(note that you shoud use "Progra~1" instead of "Program Files" when giving the path to MATLAB directory, since spaces in pathnames are not supported)

Finally, compile the testing program by typing:

make

This should have created a program called tester. Run this program with:

./tester

(it is important to run it from the directory where it was built)

The program will perform the tests for each of the 30 specifications, and for each specification for each solution method. For accuracy tests 1 and 2, it displays relative error for every equation. For accuracy test 3, and for all Euler equations (first separately, then together), it computes the DHM statistics several times, and displays the fraction of times that the statistics was out of the bilateral 5% confidence interval.

Code overview

The class ModelSpec implements the abstract representation of a given specification, and has 8 subclasses ModelSpecA1, ModelSpecA2, ... corresponding to the 8 models. An instance of such a class contains all the parameters of the model and the logic for computing the relative errors of all equations, given the values of the variables and the shocks.

Note that in class ModelSpec, the convention is to work with a vector of variables latex($$y_t$$) of length latex($$5n+1$$) (where latex($$n$$) is the number of countries). The vector latex($$y_t$$) contains consumption level latex($$c_t^j$$), labor latex($$l_t^j$$), investment latex($$i_t^j$$), capital (end of period stock)latex($$k_{t+1}^j$$), technology level latex($$a_t^j$$) and latex($$\lambda_t$$) (Lagrange multiplier of aggregate budget constraint) (see ModelSpec.hh for more details). Shocks are in a vector latex($$e_t$$) of size latex($$n+1$$) (idiosyncratic shocks + global shock).

Relative errors are computed using latex($$y_{t-1}$$), latex($$y_t$$), latex($$y_{t+1}$$) and latex($$e_t$$), following section 1.5 of Michel's May 2007 notes. The forward looking part of the Euler equation is separately computed by ModelSpec::forward_part(), so that it can be integrated over, and then fed back to ModelSpec::errors() (which computes the latex($$5n+1$$) errors).

Solution methods are implemented via a subclass of ModelSolution (see kkm/KKMSolution.cc and kkk/KKKSolution.cc). The purpose of these classes is to provide a uniformized wrapper around the participant's solutions. The main method of those classes is the policy function, which provides latex($$y_t$$) given latex($$y_{t-1}$$) and latex($$e_t$$).

The three tests are implemented in class SolutionTester.

The main function is in tester.cc: it constructs the abstract representations of the 30 model specifications, and then performs the tests for all solution methods.

KKM solution

Source for KKM solution is in kkm/ subdirectory. It consists of a non-linear solver (all the Fortran files in kkk/), which are combined in libhybrid.a by the Makefile.

Each of the TestA* subdirectory contains three Fortran 90 files, and a CSV file with Chebychev polynomial coefficients for each number of countries.

Since KKM's code makes uses of global variables, it was necessary to create a dynamically loadable object for each specification, and to load objects on the fly (see class KKMSolution).

The following should also be noted:

  1. KKM don't provide a value for latex($$\lambda_t$$). The testing program uses the value of latex($$\tau^1 u'_c(c^1_t, l^1_t)$$) (marginal utility of consumption of first country) as a replacement.

  2. tests for specification A2 with KKM solution give abnormally large errors on marginal labor equation, because KKM did not implement the right specification in that case (they use latex($$\gamma=1$$) and latex($$\eta=1$$) instead of latex($$\gamma=0.25$$) and latex($$\eta=0.1$$))

  3. KKM don't provide a solution for specification A7 with 4 and 6 countries, because their solution method doesn't converge with those particular specifications
  4. in some tests, the technological shock falls outside of the truncated interval. The program prints messages like: error: tech shock above zmax in function ChebPoly. This issue yet needs to be solved.

KKK solution

Data for KKK solution is in kkk/ subdirectory. There is one MAT-file for each specification.

Class KKKSolution reads the files, and computes the second-order approximation.

JedcTestsuiteWiki: TestBenchProblemA (last edited 2010-08-18 10:57:35 by SébastienVillemot)