Problems executing Dynare 4.1.3 in under RH ES4
Posted: Mon Dec 13, 2010 4:23 pmHi,
I'm working in a Red Hat Enterprise Linux ES release 4 (Nahant Update 8 ) environment.
I configured dynare using the following command:
./configure --prefix=/software/dynare/v4.1.3 --with-boost=/software/Boost/v1.41.0 --with-matlab=/software/matlab_2009b MATLAB_VERSION=R2009b
This worked fine. I then did a "make", "make html", "make check" and a "make install".
Everything seems to work fine except that the output from the "make check" included the following:
Making check in tests
make[1]: Entering directory `/software/dynare/dynare-4.1.3/tests'
make check-local
make[2]: Entering directory `/software/dynare/dynare-4.1.3/tests'
error: invalid number of indices (= 0) for 2-dimensional array
error: evaluating argument list element number 1
make[2]: *** [check-octave] Error 1
make[2]: Leaving directory `/software/dynare/dynare-4.1.3/tests'
make[1]: *** [check-am] Error 2
make[1]: Leaving directory `/software/dynare/dynare-4.1.3/tests'
make: *** [check-recursive] Error 1
I was not able to determine a fix or the seriousness of this error so I simply pressed on...
I added /software/dynare/dynare-4.1.3/matlab to my Matlab path and tried to fire up dynare on example1.mod. The log of my attempt in R2009b is as follows:
>> dynare example1.mod
??? An error occurred while trying to determine whether "dynare_version" is a
function name.
Unexpected error status flag encountered. Resetting to proper state.
>>
I've no clue as to why this happened. I made sure that I had the necessary permissions to all files in /software/dynare/dynare-4.1.3/matlab and things looked appropriate.
Then, on a whim, I figured to try the same experiment under matlab R2007b. The log of that attempt is as follows:
>> dynare example1.mod
Configuring Dynare ...
[mex] Generalized QZ.
[mex] Sylvester equation solution.
[mex] Kronecker products.
[mex] Sparse kronecker products.
[mex] Bytecode evaluation.
[mex] k-order perturbation solver.
[mex] k-order solution simulation.
Starting Dynare (version 4.1.3).
Starting preprocessing of the model file ...
Found 6 equation(s).
Evaluating expressions...done
Computing static model derivatives:
- order 1
Computing dynamic model derivatives:
- order 1
- order 2
Processing outputs ...done
Preprocessing completed.
Starting MATLAB/Octave computing.
??? Error using ==> print_info at 36
MJDGGES returns the following error code: 180388626432
Error in ==> stoch_simul at 46
print_info(info, options_.noprint);
Error in ==> example1 at 130
info = stoch_simul(var_list_);
Error in ==> dynare at 132
evalin('base',fname) ;
Now I'm completely mystified.
I would appreciate it if anyone could enlighten me as to what is happening and what I should do to get around these problems.
Thanks much for any help you can provide!
Paul
I'm working in a Red Hat Enterprise Linux ES release 4 (Nahant Update 8 ) environment.
I configured dynare using the following command:
./configure --prefix=/software/dynare/v4.1.3 --with-boost=/software/Boost/v1.41.0 --with-matlab=/software/matlab_2009b MATLAB_VERSION=R2009b
This worked fine. I then did a "make", "make html", "make check" and a "make install".
Everything seems to work fine except that the output from the "make check" included the following:
Making check in tests
make[1]: Entering directory `/software/dynare/dynare-4.1.3/tests'
make check-local
make[2]: Entering directory `/software/dynare/dynare-4.1.3/tests'
error: invalid number of indices (= 0) for 2-dimensional array
error: evaluating argument list element number 1
make[2]: *** [check-octave] Error 1
make[2]: Leaving directory `/software/dynare/dynare-4.1.3/tests'
make[1]: *** [check-am] Error 2
make[1]: Leaving directory `/software/dynare/dynare-4.1.3/tests'
make: *** [check-recursive] Error 1
I was not able to determine a fix or the seriousness of this error so I simply pressed on...
I added /software/dynare/dynare-4.1.3/matlab to my Matlab path and tried to fire up dynare on example1.mod. The log of my attempt in R2009b is as follows:
>> dynare example1.mod
??? An error occurred while trying to determine whether "dynare_version" is a
function name.
Unexpected error status flag encountered. Resetting to proper state.
>>
I've no clue as to why this happened. I made sure that I had the necessary permissions to all files in /software/dynare/dynare-4.1.3/matlab and things looked appropriate.
Then, on a whim, I figured to try the same experiment under matlab R2007b. The log of that attempt is as follows:
>> dynare example1.mod
Configuring Dynare ...
[mex] Generalized QZ.
[mex] Sylvester equation solution.
[mex] Kronecker products.
[mex] Sparse kronecker products.
[mex] Bytecode evaluation.
[mex] k-order perturbation solver.
[mex] k-order solution simulation.
Starting Dynare (version 4.1.3).
Starting preprocessing of the model file ...
Found 6 equation(s).
Evaluating expressions...done
Computing static model derivatives:
- order 1
Computing dynamic model derivatives:
- order 1
- order 2
Processing outputs ...done
Preprocessing completed.
Starting MATLAB/Octave computing.
??? Error using ==> print_info at 36
MJDGGES returns the following error code: 180388626432
Error in ==> stoch_simul at 46
print_info(info, options_.noprint);
Error in ==> example1 at 130
info = stoch_simul(var_list_);
Error in ==> dynare at 132
evalin('base',fname) ;
Now I'm completely mystified.
I would appreciate it if anyone could enlighten me as to what is happening and what I should do to get around these problems.
Thanks much for any help you can provide!
Paul